image
image

13956 Press-Fit Ball Valve V Profile

13956 Size: 1/2"*15MM/3/4"*22MM/1"*28MM/11-4"*35MM/11-2"*42MM/2"*54MM
Press fit ball valve is a type of ball valve that feature a press-fit connection, which allows for quick and easy installation without the need for welding or threading.
minimum order
1000 pieces
Stock Time
50Day
Quantity:
Contact Now

Description

Press-Fit Ball Valve ( V Profile )

13956

Technical Characteristics

  • Body material: CW617N
  • Ball: CW617N,chrome plated
  • Stem: CW617N
  • Ball seat: PTFE
  • Stem seal: PTFE
  • O-ring: EPDM, with leak detection indicators
  • Connection end:CxC / FxC
  • Medium temperature:-20℃ ~ 120℃
  • Nominal Pressure:Max.PN40
  • Valves comply with EN13828
  • Cerificate:DVGW

What Is aPress-Fit Ball Valve?

Press fit ball valve is a type of ball valve that feature a press-fit connection, which allows for quick and easy installation without the need for welding or threading.

Why Choose aPress-Fit Ball Valve?

Compared to traditional threaded connections, flange connections, or welding methods, Press-Fit connections offer advantages such as easy installation, reliable sealing, and low maintenance costs. Press-Fit ball valves use specialized crimping tools to apply sufficient pressure at the interface between the pipeline and the valve, ensuring a tight bond that forms a solid and sealed barrier.

  • Nice appearance
  • No welding
  • No leakage point
  • Withstand high pressure
  • Resistance to life : 1200N +
  • Quick installation : in 7seconds
  • Product life up to : 30years

HowTo Install aPress-Fit Ball Valve?

Please read and understand the following instructions for installing Press BallValve. Failure to follow all instructions may result in extensive property damage or serious injury.

1. Cut copper tubing at right angle(using a displacement type cutter or fine-toothed steel saw).

2. De-burr tubing on the inside and outside to prevent cutting of the valve's o-ring seals.

3. Check seal for correct fit. Do not use oils or lubricants. Use only the valve's black EPDM o-ring seals.

4. Turning slightly, slide press valve on to tubing to the fitting stop. Note: end of tubing must be fully inserted

5. Using a marker, draw a line on the tubing where it enters the valves ( marking the full insertion depth)

6. Insert the appropriate jaw into the pressing tool and push in holding pin until it locks into place.

7. Open the jaw and place at right angles on the fitting. Visually check the insertion mark to ensure the tubing has not moved.

8. Start the pressing process and hold the trigger until the jaw has engaged the fitting.

9. After pressing, release the jaws and remove the tool. Do not attempt to adjust the valve on the pipe after pressing.

Contact & Help

For more information about Press-Fit Ball Valve or any other valves, contact Plati-Valve.